How to make an amplifier from the music center

The music center is a device for playing music. But it can also be used as an amplifier, for example, if the source of audio signals is on the phone or computer. But it is important to know how to properly connect.

Materials and tools

To connect the device to the amplifier will not require special devices or programs. We only need 3 things:

1. Music Center.
2. Amplifier.
3. Tulip cable.

Attention! The connection process is also very simple, we only need to connect the cable to both devices and implement the configuration.

Important points before work

There are many types of techniques that reproduce sounds and videos. But not everyone is capable of transmitting sound signals as well as standard players do. But the latter are not so popular by themselves, and you have to look for where they can be applied. Allocate the following:

1. Use the system as speakers to enhance the sound on your phone or player.
2. Connect to the center of the tablet to improve the sound quality.
3. Using the player as a speaker for TVs.
4. Connecting to a computer. This will not only listen to music, but also watch movies with high-quality sound.
5. Connect to laptop. A good idea if the device poor-quality audio system.

Reference! Music players are able to last for many years, and they have high-quality sound. Particularly pleased that such devices can be connected as an amplifier for most existing modern devices.

Amplifier from the music center: step by step instructions

The amplifier can be made by hand. The connection is quite simple, and no additional devices other than the adapter cable are needed. Do the following:

1. Inspect the device. We are looking for connectors (usually they are located on the rear panel). We need a port to which we could connect a tulip cord. It has this name because there is a branching into three colors: yellow, red and white.
2. To choose the right tulip, you must explain to the seller what it will be used for. Perhaps the seller will ask you about the device to which the amplifier will be connected.
3. After finding the necessary connectors, insert the plugs into the appropriate ports. To determine simply correlate the colors.
4. The second side of the cable is connected to the device.
5. The connection is complete, but you need to configure the device. It does not depend on the model or type of music center. The latter just needs to be switched to mode.
6. You can include a melody.

In a similar way, you can connect it to any modern player, for example, to a computer, tablet or phone. Use the same tulip cable to connect the device and computer. And this method can be used to connect the amplifier to the music center.

Connecting the music player to any other devices is very simple. No other devices or fixtures are needed. It is enough to connect the tulip cable to both devices and make the setting.