How to replace batteries in a safe

Safe is a very useful thing in the house. In it you can safely store any thing that has value: from cash to jewelry. Its main advantage, of course, is a mechanism with a code that works not just like that, but with the help of batteries. And after some time intervals they need to be changed, otherwise the electronic mechanism may turn off at the most inopportune moment.
There is nothing complicated in the battery replacement procedure, so it is quite possible to deal with it yourself. It is only important to monitor the regularity of this action and pre-purchase several packs of batteries. You will learn about exactly where to insert the batteries and what should be taken into account during operation, in this article.

Types of safes

First you need to determine the type of your safe, if you do not know for sure. After all, there are different models, for each of which their own rules will apply.

Batteries are used in those devices where there is an electronic lock.

IMPORTANT! If you do not replace the battery in time, opening the safe will fail.

You will have to turn to professionals who crack it and will also require an additional fee. To prevent this annoying trouble, it is best not to forget about the need for a replacement, because the whole procedure takes several minutes, but it saves time and money.
There are such types of safes:

  • burglary resistant;
  • fireproof;
  • fire resistant;

These are general categories that are used by those who are not going to particularly delve into the topic. But sellers and various professionals distinguish many more different types in accordance with the characteristics of the devices and their functions.
For example, as the name implies, burglar-proof safes can withstand various hacks, but are powerless before a fire, except for an extinguished one. Inside this category there are also burglary resistance classes, which depends on where the safe will stand and what to protect. Fire-resistant models are an ideal protection of your values, but not everyone can afford them.
Before you purchase any model, you need to think about what you need in order to choose the perfect safe both in terms of functionality and cost.
You can divide the device into types according to another characteristic: the location of the battery compartment. It can be inside or outside. This is another detail that deserves attention in order to change the battery without problems in the future.

How to prepare a safe for replacement

When all the features of your safe have been studied, you can begin to replace. But before you begin, you need to prepare for the procedure.
You already know which model you have, so now you need to find out which batteries are suitable for it. They vary in power. The necessary information in most cases is provided in the instructions, and in its absence, the necessary information can be quickly found on the Internet.
If the previous batteries are not exhausted or the compartment is outside, then no problems should arise and special preparation is not required. But in the case when the compartment is inside, and the electricity in the mechanism is completely over, you have to tinker. It will be necessary to remove the plug that covers the code panel. To do this, you need an emergency key that comes with these models.
If it was lost, you will have to contact the after-sales service.

Battery Change Instructions

The easiest option is again to replace the batteries in the safe, where the compartment is located outside. You just need to open it either with a special push or with a screwdriver and place the energy carriers there. Be sure to observe the polarity and try not to short the contacts of the device. Then the compartment closes.
The advantage of the electronic lock is that even if the energy has already run out, the code lock will be saved, so you can open it immediately after replacement.
In the case when the box is inside, you can also try to energize the mechanism using the terminals that are on the panel. Do not forget about safety rules and polarity.

NOTE! Compartments are different. And each of them will only fit a certain type of battery.

They differ in the number of batteries that can be placed in them, in size, location and many other factors. Each model, depending on the amount of electricity that the mechanism needs, has different boxes.

Despite the fact that the general replacement instructions for almost every safe are the same, each box may have its own characteristics, without knowing which, you can ruin the whole mechanism.

Subtleties of the shift and recommendations

The most important thing is to replace on time. Experts recommend doing this at least once a year or immediately after the warning of a decrease in voltage works. After such a signal appears, the safe will open about 50 more times, but it’s not worth the risk.
The best batteries that are advised to be put in safes are alkaline and lithium.
Be careful during all operations performed with a wrench or screwdriver - if you have never used these tools before, you can easily ruin the mechanism, and this will result in an expensive and long-term repair. Despite the fact that the procedure itself is simple, some models can have a large number of features and difficulties, in which even replacing the batteries can lead to a deplorable result. In this case, it is better to immediately turn to professionals, and not tempt fate.
Now you know how to replace the batteries in the safe and what difficulties you may encounter during this process.

Watch the video: How to Change the Batteries on Your SentrySafe Basic Electronic Lock Fire Safe (March 2024).

Leave Your Comment