Red dots on the monitor

During operation, each device tends to find some kind of malfunction. If red dots appear on the monitor, this indicates a problem. However, this does not mean that the design is no longer usable. Thus, in this article we will analyze not only the causes of occurrence, but also ways to eliminate them.

How do they look

Previously, it makes sense to understand that a broken pixel has several varieties, but all of them do not affect the color transfer. As for the appearance of the red dots, these are small specks that can be observed directly on the equipment screen. They are really easy to notice, as they immediately begin to annoy the user. However, one should not worry about this, although launching the situation is also highly discouraged.

First of all, their presence indicates one of the problems. They can be related:

• With own video card;
• With a monitor of a personal computer or laptop;
• With pre-installed driver;
• Or with a cable from the video card.

For each of the sources of the defect, you can choose the appropriate method for elimination, which will be discussed later in the article.

How to get rid?

As mentioned above, several methods can be distinguished. Thus, we will analyze the most common and effective of them:

• Most often, the software version is used in practice. As the name implies, for this you need to install a specific program. The principle is based on its operation with fast frequency. Due to this, the colors of the pixels change. As a result, the cure of the defective point can be observed.

IMPORTANT! As for time expenditures, this is a dependence on the immediate situation. It is usually required before noon. So, it is recommended to download either IsMyLcdOK or Dead Pixel Tester 3.00.

• If we talk about the first of them, you will need a launch, after which you will be available instructions. Therefore, to achieve the result, it is enough just to stick to it. The second program is also easy to use. In addition, on the Internet, you can find many more of these mechanisms to eliminate dead pixels.
• Do not forget about the mechanical method. To do this, disconnect the device from power. Next, note the "sore" place with a safe tool. It can be either a toothpick surrounded by cotton wool or an ear stick. Then, applying minimal effort, you should click on the designated mark. Now you can turn on the unit and check the performance. If the outcome is negative, repeat the procedure. You cannot use your own finger as a "massager". This precaution is explained by the fact that it has a larger diameter than, for example, a toothpick. So with it, you can damage those parts that are located next to the problem.
• There is a liquidation process similar to the previous one. However, you need to arm yourself with a stylus. It must be fixed in a certain position and turn off the screen in parallel. Then re-activate the functionality, but continuing to also hold the product. You can remove it only when the equipment starts to work properly. This principle gives a shift to the defect. However, if you did not succeed the first time, then you can again carry out the described actions.
• Such an embodiment cannot fully guarantee success; therefore, it is recommended to reproduce it last. So, this will require shutting down the entire system. This includes both the network, the video card, and other mechanisms. As for the laptop, here you will need to de-energize it from the battery. Now it is important to leave the device indefinitely in the indicated state. The fact is that in this situation, all available capacitors can be fully discharged, that is, do not leave a percent in themselves. Due to this, the current, which is in excess, is able to be eliminated. Therefore, after the updated activation of the equipment, perhaps the broken point will work again.