Do-it-yourself UPS for a heating boiler

Any person who is heated by electricity is faced with the problem of turning it off. The solution to the problem is interruptors or UPSs that can operate when the power is turned off. UPS can be purchased at any store, but you can create it yourself. We will explain how to do this later.

DIY UPS for the boiler

The interruption or installation of the UPS is a device that helps protect the boiler connected to it from power surges. It is also used if the electricity is turned off for a short time and there is a problem of high-frequency noise. The UPS has a powerful battery in order to maintain backup power for a short time. It works for a long time and often depends on the battery in it. The better the battery, the longer its life.

You can make a UPS for the boiler using the circuit, skills in working with construction tools and the advice of experienced craftsmen. Production will cost from 10 to 12 thousand rubles. The finished device in the store will cost more, about twice. This may be one of the reasons for creating the device yourself.

What is required

Creating an uninterrupted installation for the boiler or for a circulating pump for heating with your own hands requires the creation of an inverter-device, from which a constant current in the battery in the amount of 220 volts is obtained. Naturally, it is better to create a UPS from a battery from a battery due to its cheapness. For the normal functioning of the boiler, working on electricity, it is better to install an inverter device of the CPS type (the optimum indicators are 3500, 7500 and 5000 PRO).

What you should pay attention to

Most heating systems use methane particles as fuel. For stable operation of the system, a constantly generating voltage, current is needed. If you turn off the battery, the boiler will cool. This is bad because microcracks can form on it. At first they will be small, then increase in size.

Nuances and possible errors

To exclude coolant cooling, it is necessary to create a harmonious system for voltage filters. It can be created using a proven scheme. Such types of filters include various resistors, transformers, and other auxiliary devices.

A properly designed system can organize stable operation to any source of electricity. Its scheme is simple, any novice master will cope with it.

The primary concern is counting parameters. The components of the circuit are calculated and made in an identical manner. It is collected in a sequential or parallel manner. In any case, a frequency of fifty gigahertz is created. Next, calculate the parameters of inductive coils under the core. A gap between the turns is made in the core.

Universal formulas for calculating all the necessary components look like this:

To exclude possible errors in creating a non-heating heater, you need to take care of safety.

1. Gloves should be worn to avoid getting a current discharge from wires or contacts.
2. It is necessary to carefully inspect the wires. They should not have any cracks, since a short circuit is very dangerous for the health of the master and the room (it can cause a fire).
3. The system requires the connection of several batteries (it is better to take several fully charged and connected in parallel. It is impossible to take cheaper devices, because their quality and operating time are usually appropriate. No need to connect to the device all unnecessary. It should be used for equivalent in power devices. However, for computer devices, as usual, this power is enough. The main thing is the lack of exceeding the total power. The best choice is phase-dependent models.

UPS for the boiler yourself: step by step instructions

Self-assembly of an uninterruptible power supply is real. She will need specific skills. If a person does not have knowledge in this area, it is better not to create an intruder yourself is better. A man will lose time, effort and money in vain. In addition, it is worth paying attention that a self-designed system will not look aesthetically pleasing. Many functions that are in store models will not work in it. In addition, it will not be automated. It will need to be controlled manually.

To create a bump, you need to take:

• Inverter 12 to 220 V. Inverter devices differ from each other in power, in the form of the signal output. For a specific case, you will need a device with the characteristics of 600 W (maximum) and 300 W (minimum).
• Battery. The better the battery, the longer it will be able to work the bummer autonomously. The 45A device will function for eight hours. Accordingly, the larger the battery charge, the longer its life per day. Helium batteries work best, since their service life is longer and they cost decent.
• Charging for the battery. Naturally, it should be equivalent to the battery itself in charge capacity.

The step-by-step creation process includes the following procedures:

1. In the UPS openings with a plus and minus designation, it is required to stick the thick corresponding battery wires.
2. After connecting the wires, plug the boiler into the mains, and then press the power button of the device.
3. After the battery is completely discharged, you need to recharge the device with the appropriate recharge and resume the supply of electricity.

When assembling the UPS for the boiler, you need to pay attention to:

• Fastening of structural parts: only copper wires should be used;
• Reliability and strength of the places where the wires in the equipment are connected;
• Checking connections every day. Perhaps the metal will oxidize in several places and degrade the system.

Attention! The assembly of coronary heart disease is 30-50% economical with full compliance with the above rules and tips.

Installation of the finished UPS

It is not very difficult to install a bump-free boiler. To do this, take an indicator screwdriver with a socket and find the output phase of the device as follows:

• Put the UPS in a stand-alone operation mode, configure the voltage indicator, connect the device to the network and check it.
• If there are no changes in the voltage indicators, you can start connecting the UPS to the boiler. After that, check the voltage again when the heat source is in stand-alone operation.

If you succeeded in assembling the UPS for a gas boiler with your own hands, then the issue of maintenance will also seem easy. You only have to replace the battery after some time and periodically check the integrity of the entire structure. Installing the UPS is best in the basement or basement, so that it does not clutter up the room. Naturally, moisture should not get into it, for this reason it must be placed in a cabinet.

In general, a UPS in any home is necessary because it guarantees the safe operation of the heating system and prevents its possible breakdown with subsequent expensive repairs. Thanks to the constant supply of electricity, it is possible to ensure optimal and efficient operation of the heating system. Pump UPS is the best solution to issues related to interruptions in work and power supply. It’s not cheap to create your own bummer, as well as a store version, but it will pay off after a few months of work.