The speakers on the computer do not work, there is no sound

On your laptop you can watch your favorite TV shows and movies, as well as have a good time playing an interesting computer game. This type of equipment is very convenient to take with you to any place, it has compact dimensions, light weight and good performance. If you want to improve the quality of the output sound and achieve a full-fledged effect, like in a movie theater, you can use speakers or special speakers.

Due to the huge assortment and the rapid development of production on the shelves of shops you can find a wide range of equipment sold. In order to purchase high-quality equipment, you should carefully study all the characteristics of the speakers and compare advanced models. For convenience, you can see the rating of the best devices in this category.

Sometimes when you turn on the system in work, various problems can arise. The most important of these is the lack of sound. To cope with this situation, it is necessary to properly diagnose and begin troubleshooting. In our article, we will talk about the possible causes of malfunctions and ways to fix the speakers. Depending on the type of malfunction, the algorithm of actions can vary significantly, so for convenience we will consider each of the options.

IMPORTANT: Do not try to disassemble the equipment if you doubt your abilities. Contact a specialized service center for help.

Connecting the speakers to the laptop is not difficult, usually the whole system is connected quite simply. For convenience, you can use the instruction manual or the attached instructions. But sometimes when outputting sound to the speaker system, problems may arise, in some cases a complete lack of reproduction is possible. In order to correctly assess the cause of the problem and proceed to resolve it, you must determine the source. Most often, problems can arise for the following reasons:

• Breakage or mechanical damage to the speaker enclosure.
• Bending and breaking wires at the junction with the speakers.
• The ingress of dust, large particles of dirt or water droplets into the equipment enclosure may cause the chips to leak.
• Faulty connection of wiring, microchips and boards.
• Damage to the speaker port (wired connection) or a discharged battery (wireless versions).
• The drivers are not installed on the laptop, or their version is outdated.
• Defeat software with a virus or malware that blocks applications.
• Failure of settings and setting the volume level to the minimum value.

If possible, make a self-diagnosis and troubleshooting. If this is not possible, contact the technical support center for detailed verification of all systems.

IMPORTANT: It is not recommended to independently analyze the equipment, since experience and appropriate education are necessary for working with electronics.

After you have been able to identify the cause of the malfunction, you can proceed with actions to eliminate it. If you wish, you can contact the workshop, we will tell you how to independently solve the problem. To understand the work plan, follow the step-by-step instructions, follow all the steps in the specific sequence described below:

1. First, find out exactly what the problem is. Try pairing the speaker system with other equipment. If everything works, then there is a malfunction in the laptop and you will have to work with it.
2. If there is no sound output, even after pairing with another laptop, you should configure and repair the speakers.
3. Make sure that the equipment is connected to a power source and check the pairing with the computer. After that, proceed to identify the problem and solve it.
4. To begin with, clean all the elements to remove any dirt and get rid of the remaining moisture accumulated inside the case.
5. Then inspect the external condition of the equipment. It is possible that there are defects in the speaker housing and the wire loop. In addition, multimeters can be used to detect where the cord is damaged. If you have experience, you can solder the wiring or change the speakers.
6. Check the condition of the USB connectors and adapters for connecting the equipment. When using wireless speaker types, make sure that you have enough battery power. If necessary, correct the deficiencies found.
7. Check the documentation for compatibility of the speaker system with the PC version. Despite the advanced developments and the active introduction of universal pairing methods, some manufacturers specifically create products with a narrow spectrum of action.

REFERENCE! The proposed options involve repairing the speaker system with the possible replacement of component components, we will talk about the method of settings through a PC later.

It is impossible to write the exact algorithm for solving the problem, since the way to solve the problem depends on the characteristics of each particular case. Try to see all the options, starting with the most obvious, so you can decide on the task. After that, take measures for self-repair or contact the master.

If the laptop recognizes the connected speaker system, it means that the connection is working correctly, and the problem is definitely not in the wiring. Try pressing the power button on the panel of the column itself and adjust the volume. This can be done using the buttons on the body of your equipment or through a laptop.

In the latter case, click on the speaker icon in the lower right corner, raise the slider to the desired volume level from 0% to 100%. After that, go to the properties and playback parameters to adjust all indicators and configure the operation of the equipment.

And if the laptop does not see the speakers? Compared to the previous, this option is less common. The first thing to do is restart the laptop. To do this, close all programs, turn off the equipment, wait 10-15 minutes and turn everything on again. Typically, this situation occurs during prolonged work without interruption and a large number of open and active applications. The system can not cope with the load and power, a break is quite able to help in this case.

If this does not help, you need to proceed further according to the scheme:

1. Go to the "device manager" through the "start" and "control" keys.
2. From the list of available and connected devices, find the column you need. If there is an exclamation mark in the yellow triangle opposite it, then you need to reinstall the drivers or update their version to the latest by downloading it on the official website. At the same time, check the functioning status of other connected devices and update their drivers if necessary.
3. Open the run dialog using the win and R keys or using the start button in the main menu. In the window that opens, enter the request services.msc, and then confirm the entry with the Enter key. In the window that appears, select Windows Audio and activate the automatic launch of the device and sound output through it.
4. In addition, select the technique in the “sound” menu to output the default sound.