Laying laminate in a narrow corridor

Of course, in order for the result to please you, you need to know and take into account some features of the whole process, which can significantly affect the activity. That is why it is so important to pay attention to every seemingly trifle. Moreover, all passable stages are difficult, since there is a high probability of damage to various materials and products. In the same article, we will try to deal with each step in detail and find out all the possible difficulties that can be encountered along the way.

Big difficulties usually arise for beginners who want to lay the material in a rather narrow gap. Possible difficulty is due to the fact that the distance itself is provided in very small quantities. Below, the article will demonstrate a step-by-step process in the required sequence. Performing it, even the most inexperienced master is able to achieve truly impressive results.

Surface preparation and substrate

Few people qualitatively approach this issue, and then the same people are surprised at the outcome of what they did. Consequently, this item should never be missed. And so, with regard to the substrate, it is best to choose products with a minimum thickness, despite the fact that the load in this area is very high. Further, it all depends on what material you will lay linoleum on. The following criteria should be adhered to:

• In the case when the base is concrete, it is necessary to check for evenness. This is done using a special unit. If it varies plus or minus two millimeters, then you should still carry out the procedure to obtain the most accurate space.

ATTENTION! Strength is also worth a preliminary check. The surface itself should never fall below.

• If you are the owner of the originally wooden coating, it is recommended to make sure the strength of the tree. It is important that they do not have cracks or similar defects. If available, you need to replace one damaged board or completely cover, depending on the scale of the breakdown.
• It is possible that you have to lay the material directly on a completely new surface. Therefore, for this you will need to make additional construction. Namely, the use of special mixtures and solution.
  

Instructions on how to lay a laminate in a narrow corridor

To carry out a really high-quality process, the following plan is provided, the observance of the sequence of which is mandatory. Therefore, the following points should be adhered to:

1. First you need to clean everything, that is, eliminate all possible crumbs, dust and other various small debris.
2. Next, a technical attack is calculated. Usually it is from ten to fifteen millimeters. In the future, this part will be hidden directly under the baseboard.
3. Now you can start the basic actions. It comes from the wall. It is important that all existing components obey the ends.
4. As for the second row, this is the laying of elements exclusively on the side. And also they snuggled up with boards from the first composition. Then you can raise both objects by 30 degrees and insert a new one. Talking about the last item, it is worth mentioning that it is made of the required size, and then invested as far as possible. The complete set of the whole structure should be tight and without unnecessary gaps.
5. As a result, it is supplied with skirting boards exactly at the place where the site was previously left.

The basic rules of how to lay a laminate in a narrow corridor

Since the main feature in this situation is that the location itself is of a minimum size, it is advisable to take this into account and take the following actions:

• For a visual increase, it is advised to use warm shades;
• In addition, you can make guides that will be made as a pattern.
• For lovers of dark shades, you need to carefully select the lighting, since the final result will also depend on this.